Triplex Service Drop Cable

Used to supply power, usually from a pole-mounted transformer, to the user’s service head where connection to the service entrance cable is made. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross-linked polyethylene (XLPE) insulated conductors.

Learn More

Quadruplex Service Drop Cable

Used to supply 3 phase power, usually from a pole mounted transformer, to the user’s service head where connection to the service entrance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperatures not to exceed at 75℃ for polyethylene insulated conductors or 90℃ for […]

Learn More

Covered Line Wire

Covered Line wire is used primarily for 600v overhead secondary distribution lines. It is not an electrically insulated conductor and is treated as bare conductor when installed.

Learn More

Duplex Service Drop Cable

To supply 120volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volt or lower at a conductor temperature of 75℃ maximum.

Learn More

Cable Aluminio Preensamblado

For use in overhead distribution system at 600/1000 volts or less, as the connection from the secondary power line or pole mounted transformer to the service head or entrance conductors at buildings. 2. The neutral core are designed to be bare or insulated aluminum alloy 6201-T81 conductor to perform as supporting core for overhead installation.

Learn More

CAAI-S Cables De Aluminio Aislado, High Strength

For use in overhead distribution system at 600/1000 volts or less, as the connection from the secondary power line or pole mounted transformer to the service head or entrance conductors at buildings. The neutral core are designed to be bare or insulated galvanized steel conductor to perform as supporting core higher strength than aluminum alloy […]

Learn More

CAAI Cable / Self-Supporting Cable

For air networks of secondary distribution of low-cost electricity in urban and rural areas. They are installed both in posts and attached to walls, in both cases, with the appropriate accessories.They do not require the use of insulators.

Learn More

15kV/25kV/35kV Multi-layer Tree Wire

Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way.  Installed   as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such close proximity. The resulting close-proximity configuration minimizes the amount of space […]

Learn More